Guitar - Watching sunset Art

Don P.

20 Like
Summary

Large guitar for the wall. I added some 1.5" standoffs so you can easily add lights if you decide. If you don't want lights, you can just remove of course. There are 2 bends which I tried my best to hide them when on the wall. I did change the tab location in design, so you don't get the same shadow on your guitar as i did in picture. This is a big 47" guitar for the wall. I struggled to come up with design that wasn't used and decided on person/people looking at sunset. Feel free to change and make however you decide. Enjoy!

License
Creative Commons - Attribution

You may distribute, remix, tweak, and build upon this work, even commercially, as long as you credit Don P. for the original creation.

Published

1 year ago

Downloads

309

Difficulty

Basic

Files
  • IMG_2726.JPG
  • IMG_2730.JPG
  • IMG_2733.JPG
  • guitar bends for hanging.jpg
  • IMG_2732.JPG
  • lights from amazon.jpg
  • IMG_2731.JPG
  • Guitar - watching Sunset .jpg
  • Guitar - Watching Sunset .dxf
  • Ethan Perry - 1 year ago
    That’s Awesome!

    Don P. (OP) - 1 year ago
    Not sure how the middle tab with screw hole got turn a little too much. it needs to be rotated a few degrees back for screw slot is straight up and down when bent. It does need to look slanted but not so much. You don't really need it with screw just more for spacing anyways. I added these standoffs because many don't have a welder to add the spacing needed. if you do you may want to remove from DXF and tack weld 1.5" hidden tabs.

  • Dave Smith - 1 year ago
    Are you using a CF Pro or an XR table and are you using fusion 360?

    Don P. (OP) - 1 year ago
    CF Pro and yes fusion 360

  • BRIAN JETTER - 1 year ago
    thanks don P this is a great design!

Authentication required

You must log in to post a comment.

Log in